5 Dry Contact Inputs (SP2 Only)
A
bility to have up to 5 dry contact inputs per RJ45 on the SP2
These dry-contact ports can be used to monitor any dry-contact inputs, just like the normal autosense dry-contact ports, but, these ports can only be set to operate in the input mode.
- Product Code: 5DCSXXX
- Various Lengths Available
- Powered by the base unit
- Optional 5 / max 10 dry contacts on sensorProbe2DC
- Normally open/normally closed dry contact sensor
- Input mode Only
- Input voltage range 0-5 Volts
Datasheets & Media Pack
Specifications
| Measurement Range : | Alarm or Normal |
| Communications cable : | RJ-45 jack to sensor using UTP Cat 5 wire |
| Sensor Type : | Open / Closed contact switch |
| Input Voltage Range : | 0 to 5 volts |
| Power Source : | Powered by the sensorProbe. No additional power needed |
| Measurement Rate : | Multiple readings every second |
| Normal input voltage is settable under software | |
| Normally open, normally closed is settable under software | |
| Up to 5 dry contact inputs per RJ-45 making upto 10 Dry Contact Inputs in sensorProbe2 |