Z- Server

STABLE STRUCTURE
Acceptable static load 1500 kg
MULTIPURPOSE
Smooth tool-free adjustment of 19″ mounting profiles.
Mounting profiles are U-marked to simplify installation.
The width can be changed from 19’’ to 21’’ with no need to use additional mounting elements.
Door opening angle up to 270 degrees, adjustable direction of opening.
Easy installation thanks to split side panels.
Optional mounting of partitions between cabinets at any time of their operation.
Tool-free mounting of grounding cables to cabinet components.
Tool-free mounting of the top plate of cabinet
SAFETY
Locks with access control are available
PERFORMANCE
Doors with optimum perforation spacing of 80%.
Up to 86% of the door area is perforated to provide adequate cooling
for the installed devices.
To optimise the flow of cold air we provide the following components
to isolate cold and hot areas at the cabinet and Z-SERVER BOX server room.
Z-SERVER SYSTEM
The new Z-SERVER cabinet system represents innovative quality solutions
for data-processing centres. Scalable functionality and easy adaptation enabled
by the available additional equipmen
- Z-SERVER BOX cold aisle installation
- air flow guiding elements within a single cabinet
- logical cabling arrangement elements
- power supply system mounting elements.Cold Aisle Containment (Z-Server Box)
Z-SERVER cabinet accessories
Side panels
Available in four versions: A, B, C, D.
Version A: door can be opened up to 270 degrees.
Version B: provides sufficient mounting space in 600 mm wide
cabinets. Enables the installation of a power strip between the
side panel and the 19” mounting profile.
Version C: partition between cabinets (cabinets with feet).
Version D: partition between cabinets (cabinets without fee

Rod latch
For doors with ZPAS access control
19″ central mounting profile

Vertical masking panel
For sealing the area between the 19″ space and the cabinet side
panel. The panels prevent the recirculation of hot air to the front
area of the cabinet, and increase the efficiency of air conditioning
systems. In case of 800 mm wide cabinets the panels include
an opening for cable claps and 1U cable grommets for the installation
of other equipment. Vertical masking panels are mounted
on 19″ mounting progiles without the use of tool
Horizontal masking panels
For sealing the area between the 19″ space and the top and
bottom plate of the cabinet. The panels prevent the recirculation
of hot air to the front area of the cabinet, and increase the efficiency
of air conditioning systems. Horizontal masking panels are
attached to the vertical panels.

Vertical cable tray
For 800 mm wide cabinets. For arranging high-density cabling in
the vertical direction. Mounted on a 19″ mounting profile without
the use of tools.
Vertical cable com
For 600 mm and 800 mm wide cabinets. To arrange cabling in the
vertical direction. Mounted on a 19″ mounting prole without the
use of tools.
19″ cable trays
Mounted between 19″ mounting profiles. Made of plastic.
Available in 1U and 2U heights.
Compliant with high-density cabling cabinet
Vertical and horizontal arrangement piec
Intended for:
– arrangement of logical cabling,
– arrangement of power supply cables,
– mounting of power distribution strip and other accessories.
The arrangement pieces are mounted on the cabinet frame
Power strip bracket
For mounting ZPAS power strips to 19″ onto mounting profiles
and vertical arrangement pieces.
Tool-free mountin
Brush strip
Do płyty górnej szafy Z-Server.
