STANDARD CABINETS WITH FRONT DOOR WITH METAL SIDES
Available in constant supply from ZPAS S.A.’s warehouse

ADVANTAGES
– Cable openings in the top and bottom plates, 71 mm wide, what allows to put thought the power cable with three-phase plug.
– All openings in the top and bottom plates blanked with knock-out blanking plates.
– U-marking on the mounting profiles.
– Maximum opening angle for front door – 180°.
– Possibility to change door opening’s direction.
– Possibility to put the cabinet directly on the floor (no protruding elements under the cabinet).
– Adaptation for bying the cabinets in the rows and Data Box creation.

SCOPE OF DELIVERY
– Frame.
– Front Glass door with metal sides witch three-point rod-latch lock with swing handle.
– Rear Solid steel, shortened door with single-point locks + 1 piece of 3 U module panel with brush strip, mounted under the shortened door.
– Solid steel side panels with single-point locks.
– 2 pairs of 19″ mounting profiles.
– Earthing bar and cables.
– Cabinet based on levelling feet.

MATERIAL
Frame, side panels, solid steel door, mounting profiles, C-profiles – sheet steel
Steel door with glass – sheet steel, mineral safety glass
Outriggers – zamak casting

PROTECTION DEGREE
IP 20 in accordance with EN 60529 (does not apply to brush cable entries).

SURFACE FINISHING
Frame, roof, panels, doors, plinth – powder paint, light grey (RAL 7035)
All other colour options on request.
Mounting profiles, C-profiles – Al-Zn coated.

MAXIMUM WEIGHT OF EQUIPMENT MOUNTED IN CABINET
Leveling feet – 1360 kg
Castor type 150 – 150 kg
Castor type 300 – 500 kg

STANDARD CABINETS WITH PERFORATED STEEL DOOR
Available in constant supply from ZPAS S.A.’s warehouse.

ADVANTAGES
– Cable openings in the top and bottom plates, 71 mm wide, what allows to put thought the power cable with three-phase plug.
– All openings in the top and bottom plates blanked with knock-out blanking plates.
– U-marking on the mounting profiles.
– Maximum opening angle for front door – 180°.
– Possibility to change door opening’s direction.
– Possibility to put the cabinet directly on the floor (no protruding elements under the cabinet).
– Adaptation for bying the cabinets in the rows and Data Box creation.

SCOPE OF DELIVERY
– Frame.
– Front and rear door steel perforated (clearance 80%) witch three-point rod-latch lock with swing handle.
– Solid steel side panels with single-point locks.
– 2 pairs of 19″ mounting profiles.
– Earthing bar and cables.
– Cabinet based on levelling feet.

MATERIAL
Frame, side panels, solid steel door, mounting profiles – sheet steel
Steel door with glass – sheet steel, mineral safety glass
Outriggers – zamak casting

PROTECTION DEGREE
IP 20 in accordance with EN 60529 (does not apply to brush cable entries).

SURFACE FINISHING
Frame, roof, panels, doors, plinth – powder paint, light grey (RAL 7035)
All other colour options on request.
Mounting profiles, C-profiles – Al-Zn coated.

MAXIMUM WEIGHT OF EQUIPMENT MOUNTED IN CABINET
Leveling feet – 1360 kg
Plinth – 1360 kg
Castor type 300 – 500 kg

REFERENCE CHART