Security Sensor
Security Sensor
Secure your doors and windows
The Security sensor is a magnetic on/off switch for monitoring doors and windows.
- Product Code: SSXX
- MSRP Price:
- Optional Lengths Available
The Security sensor is a magnetic on/off switch for monitoring doors and windows. When the door, or window, opens the input signal is detected by the sensorProbe or securityProbe base unit. Alerts can then be generate to notify you even including images captured from an attached camera to give you instant visual feedback on the situation.
They are active switches that close when one half of the sensor is in close proximity to its mate. When the two sensor pairs are moved apart from each other they open. The base unit senses closure and opening of these switches.
- Unlimited number can be wired in series using one
- Intelligent sensor port
- SNMP OID for monitoring across a network
- No reasonable limitation on distance from base sensorProbe or securityProbe unit
- Powered by base unit, no additional power source required
Datasheets & Media Pack
Specifications
| Measurement Range | Alarm or Normal |
| Communications Cable | RJ45 jack to sensor using UTP Cat 5 wire |
| Sensor Type | Open/closed contact switch |
| Power source | Powered by the sensorProbe. No additional power needed |
| Power Consumption | Typical 8.95 mWatt, 1.79mA |
| Measurement Rate | Multiple readings every second |
| Maximum extension cable length 305m (1000 ft.) with approved low capacitance shielded cable or UTP | |
| sensorProbe auto detects the presence of the security sensor | |
| Up to 2 security sensors per sensorProbe2, 8 per sensorProbe8 and securityProbe | |
| Full autosense including disconnect alarm |