Single Port Temperature and Humidity Sensor

 

 Single Port Temperature and Humidity Sensor - Dual sensor, 2 sensors on one port
 Single Port Temperature and Humidity Sensor - Dual sensor, 2 sensors on one port
 

Single Port Temperature and Humidity Sensor

Dual sensor, 2 sensors on one port

Combining temperature and humidity into the one sensor frees up an additional intelligent sensor port on your base unit.

  • Product Code: THS01 or THS00 for extendable version
  • MSRP Price:
  • 2 variations available
  • Powered by the base unit

In situations where both temperature and humidity can be critical you can keep up to speed on the current conditions using this sensor. Combining temperature and humidity into the one sensor frees up an additional intelligent sensor port on your base unit.

  • Monitors temperature and humidity on a single intelligent sensor port
  • Own SNMP OID for data collection via a network
  • Temperature measurement from -40ºC – +75ºC
  • Relative Humidity measurement from 0% – 100%
  • Powered by base unit, no additional power needed

Setup is simple with the sensorProbe and securityProbe autosense function. Once plugged into the intelligent sensor port the base unit automatically detects the sensors presence and configures it for you.

All you need to do is set your thresholds for low and high warning and critical parameters. The built in graphing function of the base unit gives you a pattern of temperature or humidity trends over time.

Specifications

Temperature

Measurement Range Celsius : -40°C to +75°C
Measurement Resolution Celsius : 1°C
Measurement Accuracy Celsius : Maximum ±2.3 at -40ºC, minimum ±0.4 at +25ºC and ±1.7 at +75ºC
Measurement Range Fahrenheit : -40°F to +167°F
Measurement Resolution Fahrenheit : 1°F increments
Measurement Accuracy Fahrenheit : Maximum ±4.1 at -40ºF, minimum ±0.9 at +25ºC and ±4 at +167ºF

Humidity

Measurement range : 0 to 100% Relative humidity
Resolution : 1%
Accuracy at : 25°C ±3%
Communications cable : UTP Cat 5 cable
Power source : Powered by the sensorProbe. No additional power needed
Power Consumption : Typical 7.25 mWatt, 1.45mA
  Sensor element wettable without damage
  sensorProbe auto detects the presence of the dual sensor
  Up to 2 dual sensors per sensorProbe2, 8 per sensorProbe8 and securityProbe
Important Note: The fixed one foot type or TMP01 and THS01 are not designed to be extended. If you need to extend these sensors then you need to use the TMP00 or THS00 (remote type).We also do not recommend you trying to connect any of our AKCP sensors including the temperature and dual temp humidity sensors though patch panels or using the RJ-45 couplers to extend them. Please see the temperature sensors product manual or FAQ in our knowledge base for more details regarding this.