Single Port Temperature and Humidity Sensor (Water Resistant)
Water resistant dual sensor for damp environments
This water resistant version of the AKCess Pro Single Port Temperature and Humidity Sensor is designed for outdoor usage, or indoor area that are subject to water or moisture (eg. greenhouses).
- Product Code: THSW15
- MSRP Price:
- Powered by the base unit
In situations where both temperature and humidity can be critical you can keep up to speed on the current conditions using this sensor. Combining temperature and humidity into the one sensor frees up an additional intelligent sensor port on your base unit.
Setup is simple with the sensorProbe and securityProbe autosense function. Once plugged into the intelligent sensor port the base unit automatically detects the sensors presence and configures it for you.
All you need to do is set your thresholds for low and high warning and critical parameters. The built in graphing function of the base unit gives you a pattern of temperature or humidity trends over time.
|Measurement Range Celsius||-40°C to +75°|
|Measurement Resolution Celsius||1°C|
|Measurement Accuracy Celsius||Maximum ±2.3 at -40ºC, minimum ±0.4 at +25ºC and ±1.7 at +75ºC|
|Measurement Range Fahrenheit||-40°F to +167°F|
|Measurement Resolution Fahrenheit||1°F increments|
|Measurement Accuracy Fahrenheit||Maximum ±4.1 at -40ºF, minimum ±0.9 at +25ºC and ±4 at +167ºF|
|Measurement range||0 to 100% Relative humidity|
|Accuracy at||25°C ±3%|
|Communications cable||UTP Cat 5 cable|
|Power source||Powered by the sensorProbe. No additional power needed|
|Power Consumption||Typical 7.25 mWatt, 1.45mA|
|Sensor element wettable without damage|
|sensorProbe auto detects the presence of the dual sensor|
|Up to 2 dual sensors per sensorProbe2, 8 per sensorProbe8 and securityProbe|