PDU switched power distribution unit



 8-port power strip suitable for installation in a 19″ rack server cabinet. The strip takes up 1U in height. It has a 10/100Mbit network interface for remote monitoring of power consumption, and alerting in the event of exceeding selected states by means of sending an e-mail or SNMP.
With this power strip you can remotely switch on/off each socket separately (via web interface), and change power supply parameters, including the total power consumption (for the entire strip).
The strip has a sound system to alert personnel in the case of system overload. Also, a digital indicator to inform about total power consumed by connected
servers is installed in the front section. The maximum load for the entire strip is 16 A.

listwa-zpas-pdu-1

General description

Power parameters meter – digital measurement with display, True RMS
Installation – rack–horizontal 19″ 1U, support for 8 service outlets
Remote monitoring – Web, SNMP, included software
Audible alarm – 2-phase, warnings and overloads
Types of alarms – e-mail, Trap SNMP, sound
Safeguards – 16 A fuse
Protocols – http, https, SNMP, DHCP, UDP
Outlet control – allows for controlling each outlet separately (switching on/off)
Allows for defining sequential switching on/off.
It has an SSL certificate and provides for call encryption.
Load control: global for the entire device.
Defined alarm levels.

General description of the power strip:

  • Server output – 8 x IEC 320 C13
  • Strip input – 1 x Type F (Unischuko)
  • Safeguard – 1 x 16 A fuse
  • Network connectors – 1 x RJ45 Ethernet
  • Power consumption info – 3-digital indicator, range: 0 A ~ 20 A
  • Current and voltage measurement – rozdzielczość 0,1A, dokładność +/-2%
  • Operating voltage – 230 V
  • Frequency – 50/60 Hz full range
  • Max. output current – 16 A
  • Temperature – 0-40°C
  • Humidity – 0%- 90%
  • Weight – 90 x 432
 8-port power strip suitable for installation in a 19″ rack server cabinet. The strip takes up 1U in height. It has a 10/100Mbit network interface for remote monitoring of power consumption, and alerting in the event of exceeding selected states by sending an e-mail or SNMP.
With this power strip you can remotely switch on/off each socket separately (via web interface), and change power supply parameters (including power consumption) for each port separately.
The strip has a sound system to alert personnel in the case of system overload. Also, a digital indicator to inform about total power consumed by connected servers is installed in the front section. The maximum load for the entire strip is 16 A.

listwa-zpas-pdu-2

General description

Power parameters meter – digital measurement with display, True RMS
Installation – rack – horizontal 19″ 1U, support for 8 service outlets
Remote monitoring – Web, SNMP, included software
Audible alarm – 2-phase, warnings and overloads
Types of alarms – e-mail, Trap SNMP, sound
Safeguards – 16 A fuse
Protocols – http, https, SNMP, DHCP, UDP
Outlet control – allows for controlling each outlet separately (switching on/off)
Load control – for each particular outlet, and global for the entire device
Allows for defining sequential switching on/off.
It has an SSL certificate and provides for call encryption.
The device has Auto PING function for device check, web presence and restarting.
It counts electricity consumption in kWh.
Allows for linking outlets into groups and managing them.
Action calendar for outlets and groups.
Defined alarm levels.
Optional ambient temperature and humidity sensor.

Dane techniczne:

    Server output – 8 x IEC 320 C13
    Strip input – 1 x Type F (Unischuko)
    Safeguard – 1 x fuse 16 A
    Network connector – 1 x RJ45 Ethernet
    Optional connector – 1 x temperature and humidity sensor
    Power consumption info – 3-digitalindicator, range: 0 A ~ 20 A
    Current and voltage measurement – resolution: 0.1 A, +/-2% accuracy
    Operating voltage – 230V
    Frequency – 50/60 Hz full range
    Max. output current – 16 A
    Temperature – 0–40°C
    Humidity – 0%–90%
    Dimensions – 215 x 432 x

 Only for PDU-2
General description:
Colour – RAL 9005
Connection cable with a plug – RJ11
Temperature measurement – 0–125°C
Temperature measurement resolution – 0.5°C
Temperature measurement accuracy – (+25°C) 1°C
Humidity measurement – 5–95%
Humidity measurement resolution – 1% RH
Measurement accuracy (+25°C) – 5%
Response time (+25°C 90%) – 1 minute
Dimensions – 65 x 47 x 26 mm
Weight 150 g

czujnik-temp-wilgot-do-listwy-zpas-pdu2